Designated Use And Limitations To Use; Remaining Hazards - Jet ELITE EHB-270DGSVIP Mode D'emploi

1.1 Designated use and limitations to use

The machine is for industrial use and has been designed for sawing machinable metal and plastic materials only.
The workpiece must allow to safely be loaded, supported and clamped.
The machine is intended for indoor use. The protection rating of the electrical installation is IP 54.
If used for other purposes, JET disclaims any real or implied warranty and holds itself harmless from any injury that may result from
that use.
WARNING:
The machine is not suitable for cutting magnesium...high danger to fire !
The machine may not be used in explosive environments.

1.2 Remaining hazards

When using the machine according to regulations some remaining hazards may still exist.
The moving saw blade in the work area can cause injury.
Broken saw blades can cause injuries.
Thrown cutting chips and noise can be health hazards.
Be sure to wear personal protection gear such as safety goggles and ear protection.
The use of incorrect mains supply or a damaged power cord can lead to injuries caused by electricity.
When opening the electrical cabinet, the grid-feeding voltage persists. Therefore pay attention every time you enter it.
7