Key Charts - One for All CURC4110 Guide De L'utilisateur

All manuals and user guides at all-guides.com

Key Charts

LED
Press MENU (EXIT) once to display (or clear) your
selected device's main menu.
Press GO BACK once to recall the last channel.
Use CH + (or CH -) to select the next higher (or lower)
channel.
Press SHIFT in device menu systems to
use the CH and VOL keys as arrow keys
in the menu systems. Press SHIFT, then
MUTE to select the highlighted item.
Press SHIFT in DVD mode to use the
CH keys as SKIP FORWARD and SKIP
REVERSE keys (to go forward or
backward one chapter).
Press MUTE once to turn the sound off or on.
Use VOL + (or VOL -) to raise (or lower) the sound
volume.
Use Rewind, Play, Forward, Pause,
or Stop to control your VCR, PVR (or
DVR), or DVD player.
Press REC twice to record a VCR or PVR (or DVR)
program.
Use SLEEP to set the sleep timer on a selected device if
equipped with this feature.
Use SET for all programming sequences.
When the LED (red light)
blinks, the remote control
is working and (after
programming) is sending
signals.
Press VCR, DVD, CBL/
SAT (DTC), or TV once
to select a desired home
entertainment device to
control. Also see the Device
Table on page 4.
Note: DTC stands for
Digital TV Converter.
Press PWR once to turn on
or off the selected device.
Use the keypad (1 ~ 9
and 0) to directly select
channels (e.g., 009 or 031).
Use TV/VID to switch the
TV's input to view TV or
video programs.
Press ENTER/– once after
entering the channel
numbers on some TVs. When
you're entering digital TV
channel numbers directly,
this button lets you separate
the main channel number
from the sub-channel
number (such as 59.1).
3