Philips AVENT SCD535 Mode D'emploi page 25

Question
What happens during a
power failure?
Is my baby monitor
secure from
eavesdropping and
interference?
The operating time of
the parent unit is
supposed to be at
least 24 hours. Why is
the operating time of
my parent unit shorter?
Why doesn't the
battery symbol appear
on the display of the
parent unit when I start
to recharge the parent
unit?
Answer
If the parent unit is sufficiently charged, it continues to operate during a
power failure, both inside and outside the charger. If there are batteries
in the baby unit, it also continues to operate during a power failure.
The DECT technology of this baby monitor guarantees no interference
from other equipment and no eavesdropping.
When the rechargeable battery pack of the parent unit has been
charged for the first time, the operating time is less than 24 hours. The
rechargeable battery pack only reaches its full capacity after you have
charged and discharged it at least four times.
The volume of the parent unit may be set too high, which causes the
parent unit to consume a lot of energy. Decrease the volume of the
parent unit
The microphone sensitivity level of the baby unit may be set too high,
which causes the parent unit to consume a lot of energy. Decrease the
microphone sensitivity level in the menu of the parent unit.
It may take a few minutes before the battery symbol appears on the
display of the parent unit when you charge the parent for the first time
or after a long period of non-use.
EngliSh
25