HQ Power VDL25BM Mode D'emploi page 5


Have a qualified electrician carry out the electric connection.

The installation has to be approved by an expert before the device is taken into service.

Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
6. Operation
1. Connect the power plug to the mains to start the bubble machine.
2. Pulling the plug will stop the machine.
7. Cleaning and Maintenance

All screws should be tightened and free of corrosion.

The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.

Moving mechanic parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.

Disconnect the device from the mains prior to maintenance activities.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

There are no user-serviceable parts except for the fuse.

Contact your dealer for spare parts if necessary.
8. Technical Specifications
colour
liquid consumption
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 02/12/2014
VDL25BM
silver
± 0.33 l/h
230 VAC
280 x 240 x 240 mm
2.2 kg
5 ©Velleman nv