To Play A Source; Basic Operations - Yamaha DSP-A595 Mode D'emploi

TO PLAY A SOURCE

2
5
Notes
• Set the SELECTOR DIAL to the AMP/TUN position on the remote control transmitter.
• To operate the tuner, CD player, DVD/LD player, tape deck, MD recorder, or other components using this remote control transmit-
ter, set the SELECTOR DIAL to the component to be used. (See "SETUP CODES" on page 42.)
1
Set VOLUME to the "∞" position.
Front panel
2
Turn the power on.
Front panel
24

BASIC OPERATIONS

3 1,7
4
Remote control
or
2
3
Select the desired input source by using INPUT.
(For video sources, turn the TV/monitor ON.)
See page 26 if you are using an external decoder or
playing a tape or an MD.
Front panel
The name of the selected input source will appear on the
display.
3,4
7
Remote control
or