Basic Operations; To Play A Source - Yamaha DSP-E492 Mode D'emploi

TO PLAY A SOURCE

1
Set to the "
2
Turn on the power of this unit and other audio/video
units to be used.
3
Select the desired input source by using the input
selector buttons.
(For video sources, turn the TV/monitor ON.)
VCR
TAPE (MD)
MONITOR
* The name of the selected input source will appear on
the display
4
Play the source.
To turn off the power
Press the POWER switch again.
20

BASIC OPERATIONS

2
NATURAL SOUND AV PROCESSOR/AMPLIFIER
POWER
EFFECT
VOLUME
l6
20 l2
28 8
4
40
2
60
0
–dB
∞
" position.
POWER
TV/DBS DVD/LD
2CH/6CH
TUNER CD
(LINE 2) (LINE 1)
CINEMA DSP
DSP–E492
VCR
SLEEP NORMAL
PRESET ms dB STEREO
WIDE
kHz PHANTOM
MHz EFFECT OFF
0 20 40 60 l00
MEMORY AUTO PTY HOLD
TAPE MONITOR
INFO AFFAIRS SPORT PRO LOGIC CONCERT MONO DISCO ROCK CONCERT
PS PTY RT CT EON NEWS ENHANCED VIDEO MOVIE STADIUM CONCERT HALL
TAPE (MD)
MONITOR
PRO LOGIC ENHANCED CONCERT VIDEO MONO MOVIE STADIUM DISCO ROCK CONCERT CONCERT HALL
CENTER
MODE
5
6
If desired, use the digital sound field processor. (Refer
to page 24.)
Note
Confirm that the PROCESSOR SELECTOR switch is set to the
"INTERNAL" position. If it is set to the "EXTERNAL" position,
switch it to the "INTERNAL" position.
Notes on using the input selector buttons
Note that pressing on each input selector button selects the
source which is connected to the corresponding input
terminals on the rear panel.
The selection of TAPE (MD) MONITOR cannot be canceled
by pressing another input selector button. To cancel it, press
TAPE (MD) MONITOR again so that "TAPE MON"
disappears from the display.
When you select a button other than TAPE (MD)
MONITOR, make sure that "TAPE MON" is not illuminated
on the display.
If you select the input selector button for a video source
without canceling the selection of TAPE (MD) MONITOR,
the playback result will be the video image from the video
source and the sound from the audio tape (or MD etc.).
Once you play a video source, its video image will not be
interrupted even if the input selector button for an audio
source is selected.
3 1, 5
VOLUME
l6
20 l2
TV/DBS DVD/LD
28 8
40 4
2CH/6CH
60 2
TUNER CD
(LINE 2) (LINE 1)
0
–dB
PROCESSOR
SELECTOR
INTERNAL
EXTERNAL
DELAY/
CENTER/REAR TIME/LEVEL
VOLUME
l6
20 l2
28
40
60
–dB
Adjust to the desired output level.
8
4
2
0