Nilox E-BIKE DOC X5 Mode D'emploi page 6

ASSEMBLY AND SETTINGS
DOC X5 is supplied completely assembled, excluding pedals, mudguard and front wheel, which are supplied
separately.
HANDLEBAR
Place the handlebar in the centre of the stem at the desired height.
Firmly tighten the Allen screw indicated by the arrow.
PEDALS
The pedals will arrive disassembled and in a separate plastic bag.
Carefully screw the pedals into the dedicated seat and tighten with the
spanner supplied.
CAUTION: In order to avoid them coming loose during travel, the pedals (of
all bicycles) have the characteristic feature of having the left pedal with
SADDLE
Insert the sleeve of the saddle in its housing and adjust the height, using the
quick-release terminals, as shown in the figure.
opposite thread.
In practice, when you screw them in, you will need
to do so in the opposite direction, as though you
were unscrewing.
EN
4