ECR International CCB-150 Manuel D'installation, D'utilisation Et D'entretien page 30

10 - OPERATING INSTRUCTIONS
Compensation curve and curve offset
Press the button (see item 6 on the control panel display)
for 5 seconds once to display the actual compensation
curve, which can be modified with the DHW buttons (see
items 1 and 2 on the control panel display).
Adjust the required curve from 1 to 10 according to the
characteristic.
By setting the curve to 0, sliding temperature adjustment is
disabled.
Compensation curve
Press the heating buttons (see items 3 and 4 on the control
panel display) to access parallel curve offset modifiable
with the DHW buttons (see items 1 and 2 on the control
panel display).
Parallel curve shift
EN
30 30
EN