Programming - Plug+Play
Procedure - Example
1 Activate the Plug+Play mode at
the VSNG 850-..., hold down the
programming mode button for 5
seconds. LED1 lights up perma-
nently.
4 Switch off the Plug+Play mode at
the VSNG 850-... by briefly pressing
the programming mode key. The
LED1 at the VSNG 850-... now
flashes again to indicate normal
operation. All LEDs at the bus tel-
ephones are off, the system is ready
for operation.
2 Position the bus telephone in
apartment 1 with the receiver
down. The story call is audible as an
acknowledgement, and the LED of
the muting button flashes. Bus tel-
ephone 1 is assigned to button 1.
3 Position the bus telephone in
apartment 2 with the receiver
down. The story call is audible as an
acknowledgement, and the LED of
the muting button flashes. Bus tel-
ephone 2 is assigned to button 2.
17