5.7.
Care instructions for technical components
Motors/controller
Before cleaning, disconnect the mains plug. The motor/controller should only be
cleaned with a dry or slightly moistened cloth. Do not use solvents (petrol, alco-
hol, etc.) and avoid ingress of liquids. Do not use household detergents. If mo-
tors or push rods are heavily soiled or insufficiently coated by a greasy film,
clean them with a dry cloth and re-grease with Teflon (PTFE) spray.
Manual switch
The manual switch is maintenance-free. Clean the housing with a slightly mois-
tened cloth. Do not use aggressive detergents or abrasives, or petrol, alcohol,
etc.
Lift mechanism and metal components
Clean only with a dry or slightly damp cloth. Do not use solvents (petrol, alco-
hol, etc.) and avoid ingress of liquids. Do not use household detergents.
87