Preventive Maintenance And Servicing - philrouge EOS RELAX Mode D'emploi

10. Unused connections must be sealed with caps to ensure the in-
tended degree of electrical protection.
5.6.

Preventive maintenance and servicing

To ensure the user's safety throughout the product's service life, we recommend
having the bed checked and serviced once per year. If the bed is used in
private households, this inspection is not mandatory; however it
is required by law in public areas.
All steel components are protected by powder coating or chrome plating. The
pivot points are self-lubricating and maintenance-free.
Maintenance tasks may only be carried out by qualified
and technically adept personnel. Improper maintenance or repairs
that cause damage to the bed will void the warranty.
All repairs to the motors, controller and motor accessories
must be performed by Linak, an authorised Linak service centre
or a service technician trained by Linak. The opening of any Linak
components will void the warranty.
The bed may not be modified without the express written
consent of DOC AG. After an authorised modification, the bed
should be subjected to a thorough inspection and tested for func-
tionality and safety.
Never carry out any repairs or maintenance on the bed
while it is being used.
For the annual inspection, use the checklist in the Annex to
this operating manual.
86