Accessory Holder - philrouge EOS RELAX Mode D'emploi

4.2.

Accessory holder

Can be mounted on both the right and left side of the bed at the head end.
The holder is designed to mount the trapeze bar and IV pole.
First, the positioning pin must be used to limit the tilt angle of the trapeze bar.
The position of the positioning pin depends on whether the accessory holder is
mounted to the left or right side of the bed. The left and right sides of the bed
are defined as shown in Figure 4.1.
4.2.1. Preparing the accessory holder for the right side:
Accessory holder
72
Positioning
pin