Moving The Bed; Repairs, Spare Parts, Accessories; Assembly And Operating Manual; Assembly Instructions For The Eox Relax Boxspring - philrouge EOS RELAX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.4.

Moving the bed

The bed is equipped with a travel unit.
-
Always disconnect the mains plug before moving the bed.
-
Never move the bed over
-
Ensure that the bed is not resting on the power cable when in the parked or
starting position, and that the cable is not caught between the moving parts.
2.5.

Repairs, spare parts, accessories

In case of faults or suspected defects, unplug the power cable immediately.
The bed must only be mechanically or electrically repaired by trained personnel.
We cannot accept any liability in the case of improperly executed repairs.
The housings of drives and controls, etc. must not be opened.
DOC cannot be held liable for any damage or injuries resulting from unauthor-
ised modifications and/or use of non-original spare parts or accessories.
Technical changes may only be carried out with the manufacturer's written ap-
proval.
Only use original spare parts and accessories!
3.

Assembly and operating manual

3.1.

Assembly instructions for the EOX Relax Boxspring

Carefully unpack the metal frame and the padded box and place them side by
side so that the head and foot ends of the metal frame and box are facing in the
same direction.
or pull on
the power cable.
62

Publicité

Table des Matières
loading

Produits Connexes pour philrouge EOS RELAX

Table des Matières