Symbols; Signal Words; Intended Use - MAXXMEE DT-BAR Mode D'emploi

Pull-Up Bar
Dear Customer,
We are delighted that you have chosen the MAXXMEE pull-up bar.
If you have any questions about the training device and about spare parts/accessories,
contact the customer service department via our website: www.dspro.de/kundenservice
We hope you have a lot of fun with your MAXXMEE pull-up bar.
Information About the Operating Instructions
Before using the training device for the fi rst time, please read through these operating
instructions carefully and keep them for future reference and other users. They form an
integral part of the training device. The manufacturer and importer do not accept any
liability if the information in these operating instructions is not complied with.

SYMBOLS

Danger symbol: This symbol indi-
cates possible dangers. Read the
associated safety notices carefully
and follow them.
Supplementary information
Read the operating instructions
before use!

SIGNAL WORDS

Signal words indicate hazards if the asso-
ciated notices are not followed.
WARNING – medium risk, may result in
serious injury or death
NOTICE – may result in risk of damage to
material
05789_Inlay_de-en-fr-nl_A5_V1.indb 9 05789_Inlay_de-en-fr-nl_A5_V1.indb 9

INTENDED USE

■
This training device is designed for
fi tness and strength training. It is suit-
able for use hanging in a sturdy door
frame (74 - 97 cm wide).
■
The training device may only be used
with the hands. Never hang from the
training device by your feet or legs.
■
The training device is not designed
for medical or therapeutic purposes.
■
The training device must not be used
by several people at the same time.
■
The training device is able to with-
stand a maximum weight of 200 kg.
■
This training device is designed exclu-
sively for use in the home.
■
The training device is intended for
personal use only and is not intended
for commercial applications.
■
Use the training device only for the
specifi ed purpose and as described in
the operating instructions. Any other
use is deemed to be improper.
■
The warranty does not cover faults
caused by incorrect handling, damage
or attempted repairs. The same ap-
plies to normal wear and tear.
EN
9
11.08.2021 10:51:16 11.08.2021 10:51:16