EINHELL TE-VC 2350 SACL Instructions D'origine page 18

2. Layout and items supplied
2.1 Layout (Figs. 1-4/15)
1. Filter cleaning button
2. Wire bracket
3. Castor brake
4. Automatic socket-outlet for electric tools
5. Head
6. Handle
7. ON/OFF/Automatic switch
8. Suction hose connection
9. Flexible suction hose
10. Tank
11. Water drain screw
12. Castors
13. Wheels
14. Combination nozzle
15. Accessory compartment
16. Coarse filter
17. Suction tube, telescopic
18. Locking hook
19. Blow connector
20. Filter cage
21. Safety float valve
22. Electric tool adapter
23. Crevice nozzle
24. Pleated filter with cover
25. Foam filter
26. Upholstery nozzle
27. Dirt bag
28. Handle
29. Air regulator
30. 4 x Washers for fitting the wheels
31. 2 x Split pins for fitting the wheels
32. 2 x Covers for fitting the wheels
33. Axle for fitting the wheels
34. 8 x Screws for fitting the castors
35. Push bar
36. Push bar bracket
37. Sealing ring
38. Hook for cable store
2.2 Items supplied
Please check that the article is complete as
specified in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
Anl_TE_VC_2350_SACL_SPK13.indb 18 Anl_TE_VC_2350_SACL_SPK13.indb 18
GB
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suffocating!
•
Flexible suction hose
•
Electric tool adapter
•
Dirt bag
•
Foam filter
•
Upholstery nozzle
•
Crevice nozzle
•
Combination nozzle
•
Handle
•
Pleated filter with cover
•
Suction tube, telescopic
•
Covers for fitting the wheels (2x)
•
Axle for fitting the wheels
•
4 x Washers for fitting the wheels
•
2 x Split pins for fitting the wheels
•
2 x Wheels
•
8 x Screws for fitting the castors
•
2 x Castors
•
Coarse filter
•
Push bar
•
Sealing ring
•
Original operating instructions
3. Proper use
The wet and dry vacuum cleaner is designed for
wet and dry vacuuming using the appropriate
filter. The equipment is not suitable for the vacu-
uming of combustible or explosive substances.
Wet and dry vacuum cleaners to dust class L
are only allowed to be used for dry vacuuming of
harmful dusts with an exposure limit value greater
than 1 mg/m³ (dust class L) using the appropriate
pleated filter.
- 18 -
26.01.2021 13:52:57 26.01.2021 13:52:57