Note: Always read the upgrade instructions and release notes before up-
grading the firmware.
Upgrade: Upgrades to the new firmware as follows:
1. Save the firmware file to your computer.
2. Browse to the desired firmware file on your computer.
3. Click the Upgrade button.
Notes:
- Do not disconnect power to the unit during the upgrade. The unit restarts
automatically after the upgrade has completed. (3-4 minutes)
- After starting the upgrade process, always wait about 3-4 minutes before
restarting the camera, even if you suspect the upgrade has failed.
Backup: Save all parameters and user-defined scripts to a backup file.
Backup: Click the Backup button to take a backup of all the parameters,
and any user-defined script.
Restore: Use a saved backup file to return the unit to a previous configura-
tion.
Restore: Click the Browse button to locate the saved backup file and then
click the Restore button.
Note: Backup and Restore can only be used on the same unit with running
the same firmware. This feature is not intended for the configuration of mul-
tiple units or for firmware upgrades.
Further information
The User's Guide, and other software tools are available on the eneo web-
site at www.eneo-security.com or on the included CD.
Information on compatible video management software solutions can be
found at www.eneo-security.com/software.
30