Note: If the password is lost, the Network Camera must be reset to the
factory default settings. Please see "Maintenance" for details.
Maintenance
Use the Maintenance tab to maintain the camera especially software reset,
upgrade, backup parameters and restore parameters.
Maintenance: Provides a software reset of the camera when troubleshoo-
ting.
•
Restart: The camera is restarted without changing any of the setting.
Use this method if the unit is not behaving as expected.
•
Reset: The unit is restarted and most current settings are reset to facto-
ry default values, but the following settings do not reset:
- The boot protocol (DHCP or Static)
- The static IP address
- The default router
- The subnet mask
- The system time
•
Default: The Default button should be used with caution. Pressing this
returns the camera's settings to the factory default values including the
IP address.
Upgrade: Loades the latest firmware into this camera.
DE
EN
FR
PL
RU
29