Troubleshooting - GE IM6D Manuel Du Propriétaire Et Instructions D'installation

Troubleshooting Tips... Before you call for service
needed, service can be scheduled by visiting us online GEAppliances.com or calling 800.GECARES 800.432.2737.
Problem
Automatic icemaker
does not work
48
Possible Causes
Freezer compartment too warm.
Icemaker is not turned on.
Icemaker is not plugged in
correctly.
Water line kinked.
Water supply turned off or not
connected.
Piled up cubes in the storage bin
cause the icemaker to shut off.
Water valve is not plugged in
correctly.
What to Do
After installing the kit, allow the refrigerator to
completely cool down for 24 hours. Once the
compartment is cool, the icemaker will begin ice
production.
Move the icemaker power switch to the ON
position.
Power
Switch
(Appearance may vary)
Check that the
icemaker cord plug
is fully inserted into
Clip Restraints onto
the socket. See
Locking Tabs
Hook
Check that the plastic
water line running
from the valve to the
water tube inlet is not
the water line will
restrict flow to the
water line.
After installing the kit, make sure the house water
supply to the refrigerator has been turned on.
Level cubes by hand.
Check that the valve wire adapter is completely
plugged onto the terminals on the water valve.
Adapter
Feeler
Arm
Locking
Tabs
Adhesive-backed
Fasteners for
Water Tube
Valve Terminals
49-60704-2