GE IM6D Manuel Du Propriétaire Et Instructions D'installation page 15

SET POWER SWITCH TO OFF
4
Set the icemaker power switch to OFF. Leave
the power switch in the OFF position until the
refrigerator is connected to the water supply to
prevent premature operation.
Power
Switch
INSTALL THE ICEMAKER FILL CUP
5
icemaker fill cup
into the icemaker as shown.
PLUG IN THE ICEMAKER
6
Holding the icemaker in place, insert the power
cord plug into the socket on the side wall, making
sure that the prongs and holes are matched. Press
the plug firmly into the socket. Lock the plug in
place by clipping the restraints onto each side of
the plug. Make sure the restraints click into place.
49-60704-2
Installation Instructions
13
MOUNT THE ICEMAKER
7
in the fill cup opening
the two screws.
Make sure:
The power cord is still firmly in the socket.
fill tube
the rear of the refrigerator to make sure the fill
tube has not been pushed out of the back of the
refrigerator).
uppermost position of the mounting slots.
THEN TIGHTEN THE ICEMAKER MOUNTING
SCREWS SECURELY.
INSTALL THE ICE BUCKET
8
Put the ice bucket
icemaker.
Make sure the icemaker
power switch is set to
OFF.
ATTACH WARRANTY LABEL
9
A label
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
10
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
fill tube
or
11 12
D
9
15