SERVODAN 41-351 Notice D'utilisation page 10

Remote control
Setting/Functions via the IR Remote (accessory):
The IR Remote provides options for manual on/off and dim, for
selecting another application, carrying out a test and also other
parameters.
On and Off:
The lighting is manually switched on and off at the same time
regardless of light level.
Dim up and Dim down:
The lighting is manually adjusted at the same time.
Automatic:
Control functions according to the application selected.
Test:
Walk test, testing detection area by activating built-in presence
detector; the light sensor does not work.
Automatically reverts to operating mode after 5 minutes.
Parameters:
Select between Man and Auto applications.
Reset parameters to factory settings.
Setting desired light level via Set 1.
Setting of off delay via Time 1 (1–60 mins in steps of 1 min. and
10 mins)
For further information about the IR Remote see the installation
and user manual for IR Remote model 41-922.
If the 360° 1-10 V presence detector is in "edit mode" (unlock),
then the IR buttons On and Off do not work.
Operation & maintenance
Contact a qualifi ed electrician in the event of a fault or
breakdown.
Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com
41Y351_03_R2_110427KOE 41Y351_03_R2_110427KOE
GB
10(22)