Description Of The Control Unit; Description Of The Connections; Models And Technical Characteristics - Key Automation CT102 Instructions Et Avertissements Pour L'installation Et L'usage

EN
2 - INTRODUCING THE PRODUCT

2.1 - Description of the control unit

The CT102 control unit is the most modern, efficient system for the
control of Key Automation motors for the electric opening and closure
of sliding gates and up-and-over doors.
All other, improper, use of the control unit is forbidden. The CT102 has
20
1
2
21
18 3

2.2 - Description of the connections

1- Motor power supply connections
2- Capacitor connector
3- 230 Vac power supply connections to flashing and courtesy lights
4- 24 Vdc power supply connection to controls and safety devices
5- RED EDGE PH2-PH1-STOP safety warning LEDs
6- GREEN OPEN-CLOSE-PED-SS command indicator LEDs
7- Radio PCB connector with RX4 connection (4 channels)
8- Antenna connector
9- LCD display
10- Limit switch connector
11- Limit switch indicator LED LS1

2.3 - Models and technical characteristics

CODE DESCRIPTION
900CT102 230 V control unit for sliding gates or up-and-over doors
16
10
19
11
12
17
a display allowing easy programming and constant monitoring of the
input status; the menu structure also allows easy setting of working
times and operating modes.
14
15
13
16
5 6
4
12- Limit switch indicator LED LS2
13- UP + button
14- MENU button
15- DOWN - button
16- STEPPING SS button
17- Safety device dip switch
18- Transformer primary
19- Transformer secondary
20- F2- 500 mA rapid fuse protecting the accessories
21- F1- 6.3 A rapid fuse protecting the line
9
8
7
RECEIVER RX4
OUTPUT 1 = STEP BY STEP
OUTPUT 2 = PEDESTRIAN
OUTPUT 3 = OPEN
OUTPUT 4 = CLOSE
J3
7