How to read charging data from a battery charger
equipped with DeltaView® Link
DeltaView Link
DeltaView Link is a system that allows you to read
data from your battery charger using an app on your
smartphone. The battery charger transmits data to
your phone's Bluetooth receiver.
These instructions apply to Dual Pro battery chargers
manufactured after 11/29/16. The manufacturing
date is located on the barcode tag attached to the
pigtail cord coming out of the charger. This battery
charger is found on Champ Rider Scrubbers,
Wrangler 3330, Wrangler 2730, Wrangler 2625,
some Wrangler 2016 models, and Charger battery
burnishers.
Instructions
Step 1. Download the Pro Charging Systems
"DeltaView Link" app
For Apple iPhones: Go to the app store and search
for "DeltaView Link" by Pro Charging Systems, LLC.
For Android Phones: Go to the play store and search
for "DeltaView Link" by Pro Charging Systems, LLC.
Step 2. Turn on your phone's Bluetooth function. If
your Bluetooth is off, the app will turn it on for you
when it starts. Answer "yes" when prompted to turn
on Bluetooth.
Step 3. Locate the "DeltaView Link" icon on your
phone and press it to start the app.
Step 4. A list of all battery chargers that are
connected to AC power within range of your phone
will appear. Tap on a battery charger to select it.
Step 5. Follow the app prompts to read through the
data on your charger. You will find detailed
information about the last 100 charge cycles.