Gallagher SmartReader HR3 Manuel De L'utilisateur page 8

Bluetooth to Connected to the USB port of a computer and receives the tag
USB device data sent by the SmartReader.
Receives the Bluetooth communications from the SmartReader and
passes the information onto a computer for deciphering.
(Note: This is not supplied, but is an optional extra.)
Tag Buffer A temporary storage area in memory for tag data.
Electronic ID The Electronic ID tag number is the electronic code in an ear tag
tag number that can be scanned to recognise an individual animal.
Antenna Contains the aerial used to capture Electronic ID tag data.
Activate the Turn on the SmartReader ready for use. The screen turns on and
SmartReader allows you to select various user options.
Double-Click Two quick successive clicks of the SmartReader trigger.
Memory mode The captured Electronic ID tag data is stored in the SmartReader in
sessions until it is transferred to computer using the MyScale Pro
software.
Non-memory The captured Electronic ID tag data is immediately sent out the
mode Serial port (via Bluetooth or cable) to a Scale or data logging
device.
Read period The time the SmartReader is actively scanning for Electronic ID
tags. Once the read period ends the SmartReader antenna is
turned off. Default time is three seconds. This time can be altered.
See the SmartReader HR
Scale A digital weighing display unit that detaches from loadbars and
connects to your computer.
Scan for tags Turn on the SmartReader and single-click the trigger.
This activates the antenna and makes it ready to read Electronic ID
tag data once the tags move within the reader range.
Single-Click A single click of the SmartReader trigger.
8
All manuals and user guides at all-guides.com
Configurator Help.
3