Gallagher SmartReader HR3 Manuel De L'utilisateur page 19

If in Memory
mode, the
screen displays:
3. Determine which operating mode you need to be in.
4. If you need to change the operating mode, double-click the SmartReader trigger to
access the menu options.
If in Memory
mode, the
screen displays:
To select an option use the trigger and Single Click or Double-Click as required. If neither
option is selected within 20 seconds the menu clears and the main screen displays.
Note: Delay period is able to be altered with the Configurator.
Memory mode options
New Session
Single-Click the trigger to close the current session and create a new session.
All Electronic ID tags read from that point on are saved into this new session.
The Memory counter is unaffected by this action. See Memory Counter next.
Creating Additional Sessions
Double-Clicking the trigger generates a long beep indicating you have left the current
session, and a menu selection screen displays.
If a new session is not required, wait for the exit menu timeout.
All manuals and user guides at all-guides.com
If in Non-memory
mode, the screen
displays:
If in Non-memory
mode, the screen
displays:
19