Gallagher SmartReader HR3 Manuel De L'utilisateur page 16

Battery icon status - Operation
During operation, the battery icon on the SmartReader screen indicates the actual
amount of charge left in the battery.
Note: To show the correct value the SmartReader must be turned on and disconnected
from any external power supply.
Fully charged
Partial charged
Almost flat
Completely flat
Battery icon status - Charging
When the SmartReader is connected to an external power supply (12 V battery or 15V
battery charger) the battery icon displays the charging status:
Charging
Topping up
Trickle charging
Note: While charging using the 12 V battery cable, the reading of Electronic ID tags can
continue. When the trigger is pulled and the SmartReader is scanning for Electronic ID
tags, charging is temporarily stopped until a tag is read or until the read period ends.
While connected to the 15 V battery charger, Electronic ID tags can not be read.
16
All manuals and user guides at all-guides.com
The battery icon displays as a solid black block.
The battery icon displays a block that represents the
amount of charge left in the internal battery pack.
The battery icon flashes the icon outline indicating
that the SmartReader is about to shut down.
The screen is blank until a charging cable is
connected.
Battery icon shows all the bars constantly filling and
then disappearing.
Battery icon shows the first three bars constantly
full and the remainder filling and then disappearing.
Battery icon shows only one clear bar that is
constantly travelling the length of the full Icon.