Gallagher SmartReader HR3 Manuel De L'utilisateur page 11

Screen
Country Code
Operating Mode
Total Number of
tags in memory
Operating Mode
There are two operating modes on the SmartReader HR
•• Memory mode - The captured Electronic ID tag data is stored in the SmartReader in
sessions until it is transferred to computer using the MyScale Pro software.
•• Non-Memory mode - The captured Electronic ID tag data is immediately sent out the
Serial port (via Bluetooth or cable) to a Scale or data logging device.
Memory counter
Applicable when in Memory mode only - Displays OFF when in Non-memory mode.
The Memory counter indicates the total number of Electronic ID tags stored in the
SmartReader regardless of the number of sessions involved.
The SmartReader HR
the counter is replaced with the word “"FULL”".
EID tag number
Displays the full 16 digit Electronic ID tag number of the last read tag. The first 4 digits
identify the country code or the manufacturer. The last 12 digits identify the individual
animal.
The SmartReader can be configured to display the last 5, 6 or 7 digits of the EID tag
number in a larger format, temporarily replacing the number of tags read. The length
of time that a large format EID tag displays can also be configured as either 5, 10 or 30
seconds. See “"Operational Settings”" in the SmartReader HR
All manuals and user guides at all-guides.com
can store up to 5000 Electronic ID tags. When it reaches 5000,
3
EID tag number
Number of tags read
in current session
Battery icon
:
3
Configurator Help.
3
11