Princess 2635 Mode D'emploi page 7

CHANGING THE OIL
Make sure the fryer and the oil or fat have cooled down before changing the oil or fat (remove the plug
from the socket). Change the oil regularly. This is particularly necessary when the oil or fat goes dark or
the smell changes. Always change the oil after every 10 frying sessions. Change the oil in one go - never
mix old and new oil. Used oil is harmful to the environment. Do not dispose of it with your normal
rubbish but follow the guidelines issued by the local authorities.
CLEANING AND MAINTENANCE
Never immerse the appliance in water! Remove the plug from the socket.
- All the non-electrical parts can be washed in warm soapy water. Dry thoroughly before reusing.
- We do not recommend that you wash the parts in the dishwasher.
- Clean both inside and outside the fryer regularly.
- Regularly clean the outside of the fryer with a damp cloth and dry it with a soft, clean towel.
- Do not use abrasive detergents.
- When replacing the oil, you can also clean the inside of the fryer. Empty the fryer and first clean the
inside with a paper towel and then wipe with a wet cloth dipped in soapy water. Then wipe the inside
with a damp cloth and allow it to dry.
PRINCESS TIPS
- Always place the fryer on a stable surface and keep away from flammable materials.
- Do not place the fryer on or near a switched-on hot plate.
- Before you use the fryer it must be filled with the required amount of fat or oil. Never use the fryer
without oil or fat as this will damage the appliance.
- Never move the appliance during use. The oil becomes hot and you can burn yourself. Wait until the
oil has cooled down before moving the fryer.
- This fryer is protected by thermic protection. This means it switches itself off when it overheats
- Never immerse the appliance in water!
- Do not leave the appliance unattended while in use. Close supervision is necessary when the fryer is
used near children.
- If the fryer or the cord are damaged they should be repaired by a professional Princess Service
company. Never attempt to carry out your own repairs or to replace the cord. Special equipment is
needed for this.
- Make sure the thin pipes running along the heating element are not damaged (do not dent or bend).
- The electrical part comes complete with a safety switch which ensures that the heating element can
only operate when the element is correctly positioned in the pan.
- In the case of overheating, the pan will switch off automatically. This safety mechanism looks like a
small red button on the bottom of the electrical part or in the cord storage section. If it switches off, it
can be reactivated by pressing it with a pointed object (e.g. a pen). Make sure you remove the plug
from the socket first.
U.K. WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE = neutral, BROWN = LIVE, GREEN-YELLOW = EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour mar-
kings identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L
or coloured red.
The wire which is coloured GREEN-YELLOW must be connected to the earth terminal
which is marked with the letter E or
With this appliance, if a 13 amp plug is used a 13 amp fuse should be fitted. If any other type
of plug is used a 15 amp fuse must be fitted either in the plug or at the distribution board.
All manuals and user guides at all-guides.com
or coloured green and yellow.
7