bosal 002-838 Instructions De Montage page 4

6.
Bring the end of cable set marked R to the right tail lamp.
7.
Remove 5-way connector from the right tail light console.
a) Join the 5-way connector with fitting connector from cable set, connect remaining connector to the right light
console.
8.
Bring another end of cable set the left tail lamp.
a) Remove 5-way connector from the left tail light console,
b) Join the 5-way connector with fitting connector from cable set, connect remaining connector to the left light
console,
c) Disconnect 2-way connector of fog light in vehicle on left in boot and connect it to the fitting 2-way connector from
cable set.
9.
Connect brown and white
the eyelet terminal with sheet metal screw, do not secure the hole with anti-corrosion remedy).
10.
Trailer power supply:
Refer to 13-pin version only. 3-pin connector housing (red/blue, yellow, and
panded socket functions. Put this part of cable set behind the trim. To expand socket functions it is necessary to or-
der the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Secure the cable set with supplied cable ties, re-install all trims and other parts which were removed during installa-
tion.
Connect the earth lead to the battery and check all vehicle functions with connected trailer or suitable testing device.
cables (only in 13-pin sets) to earth (for instance drill the 3mm hole and connect and fix
brown cables) is provided for ex-
part no. 014-169
part no. 015-069