Temperature Programs - Theben RAMSES 850 top2 OT Instructions De Montage Et D'utilisation

Temperature programs

RAMSES top2 devices have several preset
programs.
– P1
– P2
– P3
– PERM COMFORT
– PERM REDUCTION
– FROST PROTECTION
Use the MODE key to access selection of
active temperature program.
Change temperature programs (P1, P2, P3)
The programs are adjusted using the MODE
key in the SETTINGS menu (see page 13ff.)
10
Use rotary control to make changes
In standard operation mode, you can tempo-
rarily change current setpoint temperature
using the rotary control. It is not stored in the
program and is replaced by the set value at the
next programmed switching time.
 Turn rotary control up or down to change
temperature setting (in 0.2 °C increments).