Set Chimney Sweep Function; Set Tsp Parameters - Theben RAMSES 850 top2 OT Instructions De Montage Et D'utilisation

Set chimney sweep function

This function serves to carry out the prescribed
emission measurements.
 Confirm CHIMNEY SWEEP by pressing OK.
 Select PART LOAD or FULL LOAD using the
+ or – keys.
Confirm by pressing OK.
SETTINGS
PART LOAD
CHIMNEY
SWEEP
FULL LOAD
INFO
PART LOAD

On
FULL LOAD

On
Set TSP parameters (Transpa-
rent Slave Parameters)
The TSP parameters are set in the SETTINGS ->
SERVICE menu.
 Confirm TSP-PARAMETER with OK.
Various TSP parameters can be set (see the
OT-Box RAMSES top2 OT operating guide).
 Use the + or – keys or the rotary control to
enter the value and confirm with OK.
The value will be transferred to the OT-Box
RAMSES top2 OT.
TSP-
PARAMETER
TSP 1
1
TSP 13
5
35
GB