Set Type Of Device; Set External Input - Theben RAMSES 850 top2 OT Instructions De Montage Et D'utilisation

Set type of device

In type of device you can choose between OT
device and a 0–10 V device.
 Confirm TYPE OF DEVICE by pressing OK.
 Use the + or – keys select OPEN-THERM
or 0–10 V and confirm by pressing OK.
SETTINGS
OPEN THERM
DEVICE TYPE
INFO
0–10 V (± 0.5 V) output
 Reset is required after device change-over.
28
0–10 V

Set external input

The external input on the RAMSES 850 top2
can be configured for various external
sensors.
CAUTION! Input is active, therefore
do not use external voltage.
The connected contact must be floating
and electrically isolated.
 Confirm EXT INPUT by pressing OK.
 You can choose between UNUSED INPUT,
FLOOR SENSOR, ROOM SENSOR,
WINDOW SWITCH, PHONE SWITCH,
PRESENCE DETECTOR.
 Confirm desired sensor/contact by pressing
OK. Select available options and confirm by
pressing OK.