Publicité
Les langues disponibles
Les langues disponibles
Press the EXPERT key to create your own bread-making programme and choose the following parameters
yourself:
- Kneading time - dough rising time - baking temperature (= to select browning).
See cycle table
page 15.
Press the
key.
Press the
key. Use the
the kneading time from 10 to 30 minutes by 1 minute
intervals. The arrow opposite
setting is being made.
Again press the
key. Select the cooking tempe-
rature from 150°C to 190°C by 5°C intervals. The
arrow in front of
will flash while the setting is
being made.
To programme in advance, change the time using
Practical advice
If there is a power cut: if, during the cycle, the programme is interrupted by a power cut or mishandling, the
machine has a 7 min protection time during which the settings are saved. The cycle starts again where it stop-
ped. Beyond that time, the settings are lost.
If you run two programmes, one after the other, wait for 1 h before starting the second to allow the
appliance to cool down completely.
and
key to select
will flash while the
Select the weight of your choice by pressing the
key. E.g.: 1000 g.
Again press the
time of between 30 and 70 minutes by 5 minute
intervals. The arrow opposite
setting is being made.
Again press the
and you can read the total time of the program that
you have selected at the centre of the screen. Press
to start cooking.
and
key, then press
key. Select the dough rising
will flash while the
key, all the diagrams are fixed
to start the programme.
49
Publicité
