Lorex ACCWIFI1 Mode D'emploi page 9

The cradle will scan for available Wi-Fi
5
networks.
6
Press
7
Device List.
Remove the Ethernet cable from the
8
cradle.
9
Tap the monitor
to connect
Congratulations! You have successfully connected
the cradle to your Wi-Fi network. You can now
place the cradle in any location with good signal
to your Wi-Fi network.
NOTE: The Wi-Fi cradle must be connected to
power and the monitor must be on the cradle to
connect to the system on your phone or tablet.
• • • • • •
3 times to return to the
7
Select your Wi-Fi
network
Enter the
password for your
Wi-Fi network
Tap Join