Iphone®/Ipad® Ethernet Setup - Lorex ACCWIFI1 Mode D'emploi

iPhone®/iPad® Ethernet Setup
Touch the Lorex Care icon to
1
launch the app.
Enter the ID code for the cradle in
2
one of the following ways:
C
Option A. Tap QRCode and scan the QR code on
the side of the cradle using your device's camera.
Option B. Tap Add and manually enter the UID
printed below the QR code on the side of the cradle.
You may need to do this if your device does not have a
camera (for example, 1st generation iPads).
Option C. If your device is on the same network as
the cradle, it will detect the cradle UID. Tap the UID to
enter.
3
Enter a name for
your system
Enter the default
password 000000
4
B A
• • • • • •
5
Tap Save