Android Ethernet Setup - Lorex ACCWIFI1 Mode D'emploi

Android Ethernet Setup

Touch the Lorex Care icon to
1
launch the app.
2
Enter the ID code for the cradle in
3
one of the following ways:
Option A. Tap Scan and scan the QR code on the
side of the cradle using your device's camera.
NOTE: You may be prompted to select the app that
will be used to scan the QR code. Select Google and
press Always to continue.
Select Google
Press Always
Option B. If your device is on the same network as
the cradle, tap Search. The app will detect the cradle
UID. Tap the UID to enter.
Option C. Tap UID and manually enter the UID
printed on the side of the cradle. You may need to do
this if your device does not have a camera.
B
A
12
Tap Click here
to add device
C