Android Wi-Fi Setup - Lorex ACCWIFI1 Mode D'emploi

Android Wi-Fi Setup

NOTE: For best performance, it is recommended
to place the cradle somewhere with good signal
strength from your router.
NOTE: If your network name (SSID) contains a
space, you must change it to omit any spaces.
Check your router's user guide for details on how
to change the network name.
You must connect the cradle to the Internet
1
using an Ethernet cable before you can
connect it to your Wi-Fi network. Complete
the Ethernet setup as described in "Android
Ethernet Setup" on page 12.
Open the Device List screen in Lorex
2
Care. Press
connected to a camera.
3
4
5
if you are currently
Tap
Wi-Fi cradle
Tap Edit Device
Tap Advanced
14
next to the