Lorex ACCWIFI1 Mode D'emploi page 18

8
The cradle will connect to your Wi-Fi network. Once
connected, it will say Connected below the network
name.
9
Tap OK twice to return to the Device List.
Remove the Ethernet cable from the
10
cradle.
11
Tap to connect
to the cradle
Congratulations! You have successfully connected
the cradle to your Wi-Fi network. You can now
place the cradle in any location with good signal
to your Wi-Fi network.
NOTE: The Wi-Fi cradle must be connected to
power and the monitor must be on the cradle to
connect to the camera on your phone or tablet.
Enter your Wi-Fi
network's password
Tap OK
Connected
16