Changing The Cradle Password - Lorex ACCWIFI1 Mode D'emploi

Changing the Cradle Password

The default password is 000000. It is
recommended to create your own password to
ensure that no one may access your video.
To change the password:
Open the Device List screen in Lorex
1
Care. Press
connected to a camera.
2
3
4
5
Record your password:_______________________
Tap OK. Press
6
to the Device List.
7
Tap the monitor
to connect
TIP: If you forget your password, press and hold the
Reset button on the cradle for 5 seconds, it will reset
using the default 000000 password.
if you are currently
Tap
the cradle
Tap Advanced
Setting
Tap Change
Password
Enter old password
Enter new password
Confirm new
password
two times to return
10
next to