Getting Started - Lorex ACCWIFI1 Mode D'emploi

Getting Started

Connect the cradle power adapter to the
1
cradle. Connect the other end to a power
outlet.
Connect the cradle to your router using an
3
Ethernet cable (included).
INTERNET
NOTE: Ensure the switch on the back is set to
INTERNET mode. DIRECT mode is for service
use only. Disconnect and reconnect the power
adapter after changing to INTERNET mode.
Place the monitor onto the power/network
2
connector on the cradle. Use the stand-up
guides to help place the monitor.
The monitor will charge when connected
to the cradle. It takes 5 hours to fully charge
the monitor.
On your smartphone or tablet, download
4
Lorex Care for free from the App Store
(iPhone®/iPad®) or the Google Play Store
(Android™).
The next steps in the setup depend if you are
connecting to the cradle using an iPhone®/
iPad® or Android™ device.
iPhone®/iPad®
For
go to page 5
Power/network
connector
Android™
: For
go to page 12
4
SM
: