Kaiser Nienhaus 338000 Notice D'installation Et D'utilisation page 39

GB Operation and functions
Description of the pre-programmed functions
Motors with programmed timers and assigned sun sensor can only be used if automatic operation is activated! The switch must be
switched on to activate automatic operation!
Automatic operation
Notes:
(switch ON/OFF)
– The sun / twilight sensor and the timers cannot be used if automatic operation is switched off!
– The motors can be button activated in automatic operation (active timer or sensor).
– A wire jumper can be connected to terminal I32 and 0V instead of switch operation!
The JRM's timers can be used to move the motors UP and DOWN at specific times. The keypad and display on the JRM are used to
programme and assign the timers (see Section 2.2).
Timers
Notes:
– Automatic operation must be switched on before the timers will function correctly!
– A timer is switched off by setting it to 00:00.
GB - 13