Publicité
Les langues disponibles
Les langues disponibles
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
Notes: The power of every indoor unit should be unity power supply.
（1） The power connection cord have been inserted on the mainboard through the piping hole
of the chassis.Please connect the power connection cord with the breaker. If the power cord is not
long enough,please prolong it with terminal block.
（2）Reinstall the wiring cover on the original place and tighten the bolt;
（3）Recover the surface panel.
Cautions
①. Do not use tapped wires, stranded wires, extensioncords, or starburst connections, as
they may cause overheating,electrical shock, or fire.
②. Do not use locally purchased electrical parts inside the product. (Do not branch the power
for the drain pump, etc, from the terminal block.) Doing so may cause electric shock or
fire.)
Install the drainage pipe
（1）For well draining, the drain hose should be placed at a downward slant.
（2）Do not wrench or bend the drain hose or flood its end by water.
（3）Wrap heat resistant material when connect the longer drainage tube though indoor.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
12
Publicité
Chapitres
