Gree GMV-ND22C/A-T Manuel D'utilisateur page 21

Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
In cool or dry mode, press X-FAN button to set X-FAN function.
When is displayed, X-FAN function is on.
When is not displayed, X-FAN function is off.
When X-FAN function is on, the water on the evaporator will be blown away until turning off
the unit to avoid mildew.
(5). Setting health function
In unit on status, press
When is displayed, health function is on.
When is not displayed, health function is off.
Health function is available when the unit is equipped with anion generator. When health
function is on, the anion generator will start operation, adsorbing the dusts and killing the bacteria
in the room.
(6). Setting air function
Press
Press
When the indoor unit is connected with fresh air valve, air function setting can control the
connection of fresh air valve, which can control the fresh air volume and improve the air quality
inside the room.
(7). Setting sleep function
In unit on status, press SLEEP button to turn on or turn off sleep function.
 When
 When

Notes:
①. Sleep function can not be set in auto and fan mode;
②. When turning off the unit or switching mode, sleep function is cancelled;
(8). Setting I FEEL function
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When
When
When I FEEL function is turned on, the unit will adjust temperature according to the
temperature detected by the remote controller to achieve the best air-conditioning effect. In this
case, you should place the remote controller within the valid receiving range.
(9). Setting timer
You can set the operation time of unit as you need. You can also set timer on and timer off in
combination.
Before setting, check if the time of the system is the same as the current time. If not, please
set the time according to current time.
1). Setting timer off
①. Pressing TOFF button, "OFF" is blinking and time displaying zone displays the timer time
of last setting.
②. Press
③. Press TOFF button again to confirm setting. OFF is displayed and time displaying zone
resumes to display current time.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
button to set health function.
button until is displayed, then air function is turned on.
button until is disappeared, then air function is turned off.
is displayed, sleep function is on.
is not displayed, sleep function is off.
is displayed, I FEEL function is on.
is not displayed, I FEEL function is off.
or button to adjust the timer time.
18