Gree GMV-ND22C/A-T Manuel D'utilisateur page 20

Notes:
When operation mode changes, fan speed is memoried;
Under dry mode, fan speed is low and can not be adjusted.
Setting swing function
Setting left&right swing
Under simple swing status, press
Under fixed-angle swing status, press
as below:
Notes: operate continuously left&right swing in 2 seconds,
according to above-mentioned order, or switch closed state and
Setting up&down swing
Under simple swing status, press
Under fixed-angle swing status, press
as below:
Notes:
operate continuously left&right swing in 2 seconds, swing states will change according to
above-mentioned order, or switch closed state and
(1). Setting turbo function
Under cool or heat mode, press TURBO button to set turbo function.
When
When
When turbo function is on, the unit operates in super high speed to achieve quick cooling or
heating. When turbo function is off, the unit operates in setting fan speed.
(2). Setting light function
The light on the receiver light board will display present operation status. If you want to turn off
the light, please press LIGHT button. Press this button again to turn on the light.
(3). Viewing ambient temperature
In unit on status, receiver light board or wired controller is defaulted to display
temperature. Press TEMP button to view indoor or outdoor ambient temperature.
When is displayed, it means the displayed temperature is
When
When
Notes:
setting temperature is always displayed in Remote Controller.
(4). Setting X-FAN function
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
is displayed, turbo function is on.
is not displayed, turbo function is off.
is displayed, it means the displayed temperature is indoor ambient temperature.
is displayed, it means the displayed temperature is outdoor ambient temperature.
button to adjust left&right swing status;
button to adjust left&right swing angle circularly
button to adjust up&down swing status;
button to adjust up&down swing angle circularly
state;
setting
17
swing states will change
state.
setting
temperature.