Technical Specifications - Honeywell PEHA Compact 952 JRM Mode D'emploi

TECHnICAL SPECIFICATIOnS

Operating voltage 952 JRM
Fusing the supply lines
PHC supply voltage for compact system
Sensor connection
Motor load per output
Power consumption (Standby)
Input resistance
Contact resistance of inputs
Input signals
Max. length of 24v signal line
Conductor cross–section of 230v lines
Ambient temperature
Storage temperature
Test specifications
Certifications
Protection level
Dimensions
100-240V~ /50-60Hz
Circuit breaker rated for 10 A, maximum
Nom. 24 V DC (SELV), 21-28 V DC (Ripple voltage 5 %)
24 V DC / 100 mA
100-240V~ /50-60Hz max. 1A
approx. 2 W
1 kΩ
Max. 33 Ohm (corresponds to < 1V DC at 24 mA)
> 40ms
400m at d = 0.8 mm (flexible or rigid wiring max. 1x 1,5 mm²), Stripped length = 8 mm
Flexible wiring: max. 1x 1,5 mm², Rigid wiring: max. 1x 2,5 mm², Stripped length = 8 mm
+10° to +40°C
–20° to +60°C
EN 60669-2-1 , EN 50428
CE, KEMA
IP20
width = 216mm (12TE), height = 55mm
GB
GB-5