Whirlpool ET18NKXFN03 Guide D'utilisation Et D'entretien page 9

Reversing the Door Handles
Remove freezer handle assembly as shown. Keep all
parts together.
Remove refrigerator handle assembly as shown. Keep
all parts together.
To reinstall freezer handle:
1. Position freezer handle on freezer door.
2. Install top 2 screws.
3. Install bottom 2 screws.
4. Tighten all screws.
To reinstall refrigerator handle:
1. Remove hole plug from refrigerator door and screw it
into place on the opposite side.
2. Position the refrigerator handle on the refrigerator door
and install top 2 screws.
3. Align the lower portion of the handle and install handle
screw.
4. (Style 1) Position screw cover and push/snap into place.
5. (Style 2) Align the top edge of the trim with the notches
in the lower part of the handle and slide upward into
place.
Style 1
1. Plugs
2. Countersink Screw
3. Top Endcap
4. Stick on Shim
5. Bottom Endcap
6. Handle Screw
7. Screw Cover
8. Plug
9