Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
REFRIGERATOR
FEATURES
Refrigerator Shelves
The shelves in your refrigerator are adjustable to match
your individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. It will also
reduce the amount of time the refrigerator door is open,
and save energy.
To remove a shelf:
1. Tilt up front of the shelf frame and lift it at the back.
2. Pull shelf frame straight out.
To replace a shelf:
1. Guide the rear shelf hooks into the slots in the shelf
supports on the back refrigerator wall.
2. Tilt up front of shelf frame until the rear hooks drop into
the slots.
3. Lower the front of the shelf into position.
Meat Drawer and Cover
(on some models)
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer with one hand while supporting
bottom of drawer with other hand. Slide drawer out the
rest of the way.
3. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release the rear of the cover from
the shelf.
3. Tilt cover up at the front.
4. Pull cover forward and out
To replace the cover:
1. Fit notches and rear edge of cover over rear and center
crossbars on the shelf.
2. Lower cover into place.
3. Replace the meat drawer.
Crisper and Crisper Cover
(on some models)
To remove the crisper:
1. Slide crisper straight out to the stop.
2. Lift the front.
3. Slide crisper out the rest of the way.
Replace the crisper by reversing the above steps.
To remove the crisper cover:
1. Remove both crispers.
2. Holding glass insert firmly, grasp one side of crisper
cover and lift the other side up from the bottom.
3. Slide the glass insert out to remove.
4. Lift cover frame up and remove.
NOTE: Before reinstalling the cover, make sure the U-
shaped reinforcement bar is reinstalled.
15
Publicité
Table des Matières
Dépannage
