Adding/Deleting Somfy Io Control Points And Io Sensors; Replacing A Lost Or Broken Io-Homecontrol® Somfy Control Point; Tips And Recommendations; Questions On The Slim Io Receiver Rs + Plug - SOMFY SLIM IO RECEIVER RS+PLUG Notice

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Slim io Receiver RS + Plug
5.3.3. Modifying the favourite position (my)
1) Place the motorised product in the required new favourite
position (my).
2) Press the "my" button on the control button until the motorised
product moves.
The new favourite position (my) has been programmed.
5.3.4. Deleting the favourite position (my)
1) Briefly press the "my" button.
The motorised product will start to move and stop in the
favourite position (my).
2) Press the "my" button on the control button until the motorised
product moves.
The favourite position (my) has been deleted.

5.4. ADDING/DELETING SOMFY IO CONTROL POINTS AND IO SENSORS

Refer to the corresponding guide.
5.5. REPLACING A LOST OR BROKEN IO-HOMECONTROL® SOMFY CONTROL
POINT
To replace a lost or broken io-homecontrol® control point, consult a home motorisation and
automation professional.

6. TIPS AND RECOMMENDATIONS

6.1. QUESTIONS ON THE SLIM IO RECEIVER RS + PLUG

Observations
The wiring is incorrect.
The motor is in heat protection
mode.
The motorised
The Somfy io control point battery
product does not
is low.
operate.
The control point is not compatible.
The Somfy io control point used
has not been programmed into the
receiver.
The motorised
The end limits have been incorrectly
product stops too
set.
soon or too late.
The "my" position is
The "my" position is deleted.
not working.
Copyright
©
2017 SOMFY ACTIVITE SA, Société Anonyme.. All rights reserved.
Possible causes
or
or
Solutions
Check the wiring of the the Slim io
Receiver RS + Plug and modify it if
necessary.
Wait until the motor cools down.
Check whether the battery is weak
and replace it if necessary.
Check for compatibility and replace
the control point if necessary.
Use a programmed control point or
program this control point.
Readjust the end limits.
Program the "my" position.
EN
my
my
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Slim io pergola+plugSlim io receiver awning+plug

Table des Matières