Publicité
Les langues disponibles
Les langues disponibles
General setup diagram
CODE
DESCRIPTION
t0
Total operating mode - automatic timed close
t1
Lighting time delay
t2
Partial operating mode - automatic timed close
Memorising the remote control for partial opening cycle
2 s.
Memorising the remote control for controlling lighting
2 s.
Clearing remote controls
7 s.
7 s.
- Press
the button until the light blinks (7 s). This clears all of the remote controls memorised.
Resetting all settings
7 s.
7 s.
1 s.
- Press the
button until the light goes out (7 s). This clears all previously stored settings and returns them to their default values.
Locking programming
- The keypad must be locked to ensure the safety of the users.
- Simultaneously press the
- Start by pressing
,Pressing
remote control memorising functions (
access programming mode once again, repeat the same procedure.
5 s.
1 s.
2 s. max.
,
and
keys.
and
must take place within two seconds. Pressing the
button) and forced mode operation (
VALUES
0 to 12 (time delay value = value x 10 s) example : 2 = 20 s.
0 to 60 (time delay value = value x 10 s) example : 6 = 60 s.
0 tox 12 (time delay value = value x 10 s.) example : 2 = 20 s.
5 s.
...
1 s.
and
5 s.
button then no longer has any effect. The
buttons) restent possibles. remain possible. To
11
Publicité
