Simu GM1000 Notice Installateur Et Utilisateur page 20

Mounting the lintel bracket and the door bracket
Assembling the two part rail
1
21b1
4
1-2-3- Unfold the two parts of the rail.
4- Assemble the two parts of the rail using the sleeve.
5- Mount the complete assembly using the eight mounting screws.
- The mounting screws must not penetrate the rail (do not drill).
- When installing the system directly onto the ceiling, do not use the sleeve mounting screws.
Fitting the rail onto the motor head
4
2
5
21b2 (X 8)
2
1
3
35 < D < 200
2
*
* Allows longer travel
- When installing the system
directly onto the ceiling (fl ush
with the ceiling), the lintel bracket
can be mounted on the ceiling,
if necessary recessed from the
lintel by up to 200 mm max.