Pulse Strength; Pulse Rate; Pulse Search Icon - Apex BiPPEX Pro Instructions D'utilisation

English
Pulse search
• The pulse search icon
flickers once every second while the device is in
idling.
• The icon of pulse search will stop flickering while in use and it remains on
the LCD screen. The pulse strength is shown from low to high.
Measurement
The readings of oxygen saturation, pulse rate, and pulse strength will appear on
LCD screen in 8 seconds. The readings will appear on the screen for 10 seconds
after measurement and then back to zero reading.
If the measurement fails, the icon of "- -" will appear on LCD screen and with
yellow backlight flickering once per second and two beeps sounded continuously.
SpO (Fig. 5-2)
2
Fig.5-2
LCD icon design for an easy reading of 35% ~ 100%.
Pulse rate (Fig. 5-3)
Fig. 5-3
LCD icon design for an easy reading of 30bpm ~ 250bpm.
Pulse strength (Fig. 5-4)
Pulse indicator shows the strength of heartbeat bottom up including the frequency
of heartbeat.
Fig. 5-4
5